Has always insisted on sustainable development

We are among best-of-breed manufacturing, distribution, and income-boosting service providers

Important measures to achieve our sustainable development

Reduce dust emission by 90%

According to the characteristics of metal polishing dust and the requirements of environmental protection, it is proposed to adopt a water spray dust removal process to control the dust. After the dust treatment, the pollutant emission from the outlet reaches the local standard of Guangdong province DB44/27 -2001″Limit value of air pollutant emission”, and the dust emission concentration is 120 mg/m3 lower. The dust removal efficiency of the cyclone plate dust removal system is about 90%, so the dust can meet the emission standard.

 

Collection and treatment of paint particles and exhaust gas

In the factory there will be a paint room, in the spray paint high-temperature baking process will produce paint particles and exhaust gas, most of these exhaust components are benzene and non-methane total hydrocarbons. Purification equipment and waste gas treatment equipment have been installed, for the paint room generated by the waste gas, also done collection and treatment, to meet the emission standards.

Help to protect our environment

Our metal furniture materials have the ability to return to the production process. It has the ability to maintain its high-quality and safe functionality while continuously re-using it. As furniture manufacturers, we protect the environment in accordance with the strict requirements of sustainable development.

Metal tubing is not waste but a resource

Metallic materials are recycled and reused without loss of quality. The amount of energy used to recycle aluminum is only 5% of the energy used to mine cast aluminum, which is a very energy-saving measure in today’s increasingly energy-hungry world. And for every ton of recycled aluminum produced, it saves at least 10 tons of water compared to producing primary aluminum directly, and mineral resources are not renewable, but we recycle them, and we make them renewable in another form, this is also a very good way for us humans to live in harmony with nature.

1. Collect aluminum waste

2. classification and compression into large waste aluminum block

3.Cut the large aluminum block into small pieces

8.the ingot re-processing and re-use

4. Sorting by magnet

7.Transfer to the furnace to form the ingot

6.Melt in a high-temperature furnace

5. Remove the coating from the aluminum